Model | RX | TX | Comments |
---|---|---|---|
TM-D710 (A/G/GA) | ✔️ | ✔️ | TX needs to be inverted |
TM-V71A | ✔️ | ✔️ | TX needs to be inverted |
Model | RX | TX | Comments |
---|---|---|---|
CDM 750/1250/1550 | ✔️ | ✔️ | Configure codeplug to use “flat audio” available on rear accessory connector. |
GM300 | ✔️ | ✔️ | Demod out is inverted. Adding a 100k resistor is needed for the RX to work. Move jumper JU551 to pos. A. |
GM900 | ❓ | ❓ | |
GM1200 | ✔️ | ✔️ | Demod out is not inverted. No HW mod necessary for RX. |
Model | RX | TX | Comments |
---|---|---|---|
FT-817 | ✔️ | ✔️ | Tested with STM32-DVM-USB and latest MMDVM Firmware using M17Client. No modification needed. |
FT-818 | ✔️ | ✔️ | |
FT-7800 | ✔️ | ✔️ | |
FT-8000 | ✔️ | ❓ | No modification needed. Use the 9600baud output at the TNC connector. |
FT-8900 | ✔️ | ✔️ | |
FTM-6000 | ✔️ | ✔️ | No modification needed. Use the 9600baud output at the TNC connector. |
Model | RX | TX | Comments |
---|---|---|---|
IC-706mkIIg | ✔️ | ✔️ |
Model | RX | TX | Comments |
---|---|---|---|
MD-380/390 | ✔️ | ✔️ | Both RX and TX work with OpenRTX custom firmware. |
MD-UV380/390 | ✔️ | ✔️ | Both RX and TX work with OpenRTX custom firmware. |
Model | RX | TX | Comments |
---|---|---|---|
RT3/RT3S | ✔️ | ✔️ | Both RX and TX work with OpenRTX custom firmware. |